Welcome to Dimensional Metals, Inc.

Span-Lock SL25

Span-Lock SL20

Inter-Lock IL20

Double-Lock DL15

Snap-On-Seam SS10

Snap-One-Seam SS15

Batten-Seam BS15

Nail-Strip NS10 & NS15

Flush-Panel FP10

V-Groove VS05

Curved-Radius CR

Tapered Seam (TS) &
Compound Curve (CC)

Wall Panels (WP)

Horizontal Wall Panel HWP16

Miscellaneous Panel Details

BATTEN-SEAM BS15

Submittal

PRODUCT: BATTEN-SEAM BS15 is an advanced design non-structural snap-on-batten system. The system is designed with two components: the panel pan and the batten cap. BATTEN-SEAM BS15 is a non-directional panel system allowing installers more control during installation over batten layout and symmetry of the panel area.

PRODUCT USES AND APPLICATIONS: Product uses include roofing with roof slopes as low as 3:12, vertical fascia, mansards and equipment screens. This system may be installed on tapered roof areas.

ROOF ASSEMBLIES: BATTEN-SEAM requires a solid substrate since it is a non-structural panel system. This system may be installed over plywood sheathing, nail base insulation, or corrugated metal deck.

ADVANTAGES:

Continuous Interlocking Batten: high batten hold-down strength
High Vertical Panel Leg: allows system to be used on lower sloped roof areas
Expansion Clips: allows for unlimited thermal expansion and contraction
Square Batten Design: an aesthetic design alternate to the SNAP-ON-SEAM
Anti-Siphoning Seam Design: prevents water infiltration
Continuous Rollformed Lengths: eliminates need for panel lap joints

(Contact DMI for Load Capacities)

STANDARD PRODUCT OFFERING
24 ga. Steel and .032 Aluminum:

MODEL NO.		BATTEN ON-CENTER
BS1512 BS1515 BS1518 BS1520		12" 15" 18" 20"

Custom panel widths are available. Consult DMI for costs and lead times.

NOTE: Continuous lengths up to 70'-0" is standard. Lengths over 53' require additional crating fees and special hauling permits. Contact DMI for details.

BATTEN-SEAM BS15 is not available with a water tightness warranty.

.032 aluminum is not stocked in all colors. Minimum order quantities and extended lead times may accompany panel orders when utilizing these substrates

Oil-canning, the slight waviness inherent with light gauge metal, does not affect the finish or structural integrity of the panel and is therefore not cause for rejection

See front for optional stiffener patterns.