 |
| DynaClad®
KYNAR 500® Standard Cool Color Guide |
|
 |
|
Colors shown may differ depending on monitor, platform, and other
factors and thus may vary slightly from actual material.
Custom
colors are available
|
| PRODUCT |
|
| DynaClad®, Prefinished Architectural Sheet Metal, Tension Leveled, Coil and Flat Sheet Coated with a 70% Full
Strength Kynar 500® OR Hylar 5000® Finish System. |
|
| PRODUCT DESCRIPTION |
|
Base Sheets
Coated on the top side with a polyester primer and a 70% full strength Kynar 500® or Hylar 5000® top coat for a total mil thickness of 1.1 (± .1) The reverse side is a polyester primer and a polyester topcoat with a total dry film thickness of .55 (± .1)
24 ga. or 22 ga. Galvalume® DynaClad®
Consists of aluminum-zinc alloy coated (55% aluminum, 43.4% zinc, 1.6% silicon, nominal percentage by weight) carbon steel of commercial weight meeting ASTM 792.
24 ga. HDG90 DynaClad®
Consists of hot-dipped galvanized steel base sheet of commercial weight (AISI G90 designation) meeting ASTM A654.
.032, .040, .050 Aluminum DynaClad®
Consists of 3105 H14 alloy aluminum base sheet of commercial weight meeting ASTM B209.
Sizes
Standard stocked Galvalume is produced in a 44 ¾” and 48” wide coil. Aluminum is produced in a 48” wide coil.
Standard sized flat sheets are cut to 120” lengths. Custom sized flat sheets can be produced in various
widths and lengths with extended lead times and additional costs.
Strippable Film
Is applied to the product to protect the paint finish and must be removed immediately after installation. Product should be stored in cool, shaded or covered areas with one side of the crate elevated to permit moisture run-off. |
WARRANTY |
|
| A 20 year finish warranty covering color fade, chalking, and film integrity as well as a 20 year, 6 month perforation warranty (Galvalume® only) covering base sheet integrity is available at no additional cost. |
|
| Color/Material Availability |
|
| Gauge |
24 Gauge |
22 Gauge |
.032 Alum. |
.040 Alum. |
.050 Alum. |
.063 Alum. |
| Alloy |
Galvalume |
Galvalume |
3105 H14 |
3105 H14 |
3105 H14 |
3105 H14 |
| Color: |
|
|
|
|
|
|
| Beige |
 |
|
|
|
|
|
| Brite Red |
 |
|
|
|
|
|
| Brown |
|
|
|
|
|
|
| Burgundy |
|
|
|
|
|
|
| Champagne |
|
|
|
|
|
|
| Charcoal Grey |
|
|
|
|
|
|
| Classic Bronze |
|
|
|
|
|
|
| Colonial Red |
|
|
|
|
|
|
| Dark Bronze |
|
|
|
|
|
|
| Dove Grey |
|
|
|
|
|
|
| Evergreen |
|
|
|
|
|
|
| Hartford Green |
|
|
|
|
|
|
| Hemlock Green |
|
|
|
|
|
|
| Leaf Green |
|
|
|
|
|
|
| Matte Black |
|
|
|
|
|
|
| Metallic Copper |
|
|
|
|
|
|
| Metallic Silver |
|
|
|
|
|
|
| Musket Grey |
|
|
|
|
|
|
| Patina Copper |
|
|
|
|
|
|
| Putty |
|
|
|
|
|
|
| Royal Blue |
|
|
|
|
|
|
| Sandstone |
|
|
|
|
|
|
| Seaport |
|
|
|
|
|
|
| Slate Blue |
|
|
|
|
|
|
| Slate Grey |
|
|
|
|
|
|
| Spartan Bronze |
|
|
|
|
|
|
| Stone |
|
|
|
|
|
|
| Terra Cotta |
|
|
|
|
|
|
| Weathered Zinc |
|
|
|
|
|
|
| White |
|
|
|
|
|
|
 |
| Mill Finished Alum. |
|
|
|
|
|
|
| Acrylume® |
|
|
|
|
|
|
| Clear Anodized |
|
|
|
|
|
|
| PERFORMANCE SPECIFICATION |
|
ABRASION RESISTANCE (ASTM D 968)
Passed 60 Liters.
ACCELERATED WEATHERING (ASTM D 822, G 151, & G 153)
3,000 hours with no chalking, blistering or loss of adhesion.
ACID RESISTANCE (ASTM E 1308)
No visible changes.
ADHESION (ASTM D 3359)
No coating removed.
COLOR CHANGE (ASTM D 2244)
After 2,000 hours color change less than 2 NBS units.
FLAME TEST (ASTM E 84)
Class A / Class 1
FLORIDA EXTERIOR DURABILITY (ASTM E 2244 & D 4214)
Less than 5?E units color change and chalk rating of less than 8.
FORMABILITY (ASTM D 522 & D 4145)
No adhesion loss on a 1/8” Mandrel and 1T bend.
GLOSS (ASTM D 523)
15% (± 5%) on 60 degrees.
HUMIDITY (ASTM D 2247)
1,000 hours Galvalume® and G-90 acceptable, no change.
3,000 hours Aluminum acceptable, no change.
IMPACT ADHESION (ASTM D 2794)
No cracking or loss of adhesion.
PENCIL HARDNESS (ASTM D 3363)
HB Minimum.
SALT SPRAY (ASTM B 117)
No blisters or adhesion loss after 1,000 hours for Galvalume® & G-90.
No blisters or adhesion loss after 3,000 hours for Aluminum.
DynaClad® is a registered trademark of Dimensional Metals, Inc.
TRINAR® is a registered trademark of Akzo Nobel, Inc.
Kynar 500® is a registered trademark of Atochem of North America.
Hylar 5000® is a registered trademark of Ausimont USA, Inc.
Galvalume® is a registered trademark of BIEC International, Inc. and some of its licensed producers.
Acrylume® is a registered trademark of USX. |
|
|  |
