Welcome to Dimensional Metals, Inc.

Span-Lock SL25

Span-Lock SL20

Inter-Lock IL20

Double-Lock DL15

Snap-On-Seam SS10

Snap-One-Seam SS15

Batten-Seam BS15

Nail-Strip NS10 & NS15

Flush-Panel FP10

V-Groove VS05

Curved-Radius CR

Tapered Seam (TS) &
Compound Curve (CC)

Wall Panels (WP)

Horizontal Wall Panel HWP16

Miscellaneous Panel Details

CURVED-RADIUS SPAN-LOCK CR-SL20

Details | Specifications | Submittal
CR-SL20

PRODUCT: CURVED-RADIUS SPAN-LOCK SL20 is a structural panel which is mechanically seamed during installation. The product is an integral interlocking system by design meaning the panels install in one direction from a given starting point. CURVED-RADIUS SPAN-LOCK is easy to install on a variety of roof plan designs.

PRODUCT USES AND APPLICATIONS: Product uses include low to high slope barrel roofing, equipment screens, mansards, and wall panels.

ROOF ASSEMBLIES: CURVED SPAN-LOCK CR-SL20 can be applied over various roof assemblies including: open framing, rigid insulation (utilizing a bearing plate under each panel clip spaced 30" o.c., max.) over 22 ga. corrugated steel deck, and various solid substrates including plywood sheathing, nail base insulation, or steel deck.

ADVANTAGES:

UL-90 classified assemblies: high wind uplift loading capacities
ASTM Air, Water Infiltration and Structural Tested: proven air and water tightness
Factory Applied Non-Curing Sealant: superior watertightness
Mechanically Seamed: may be installed on low slope applications (in conjunction with the factory applied non-curing sealant)
Multi-directional Mechanical Seaming: panel seaming is simplified
Expansion Clips: allows for thermal expansion and contraction
Continuous Rollformed Lengths: eliminates need for panel lap joints

STANDARD PRODUCT OFFERING
24 ga., 22 ga. Steel, and .032 Aluminum:

MODEL NO.		SEAM ON-CENTER
CR-SL2018 CR-SL2016		18" 16"

16 oz. and 20 oz. Copper:

MODEL NO.		SEAM ON-CENTER
CR-SL2018 CR-SL2012		18" 12"

OPTIONAL PRODUCT OFFERING
24 ga., 22 ga. Steel, and .032 Aluminum:

MODEL NO.		SEAM ON-CENTER
CR-SL2012		12"

Custom panel widths are available. Consult DMI for associated costs and lead times.

RADIUS GUIDLINES:

GAGE / MATERIAL	MINIMUM CONVEX RADIUS	MINIMUM LAYOVER RADIUS
STEEL	20'	300'
ALUMINUM	20'	220'
COPPER	20'	200'

NOTE: Continuous lengths from 4’-0” (min.) up to 90'-0" (max.) is standard. Panel lengths over 53’ require additional crating fees and special hauling permits. Contact DMI for details.

22 ga. steel and .040 aluminum are not stocked in all colors. Minimum order quantities and extended lead times may accompany panel orders when utilizing these substrates

Oil-canning, the slight waviness inherent with light gauge metal, does not affect the finish or structural integrity of the panel and is therefore not cause for rejection.

CURVED-RADIUS SPAN-LOCK (CR-SL20) products are smooth standard.